In an attack, your main aim is to stop the threat as quickly as possible. It doesn’t happen with one shot or from pulling out the gun. It happens with many well-placed hits on the attacker.

The way you grip your weapon is the major driver of how fast you impact the attacker. And that is why your grip is important. These days CNC Machined Grip is quite popular among users for its highest quality and functionality.

To know why the way you grip your firearm is important, you have to have a solid understanding of how a gun cycles when being shot. When an individual fires around, the slide moves quickly rearward and slam into the rearmost position.

It causes the muzzle end of the gun to rise. Then springs in the gun make the slide return forward, slamming into the area, causing the muzzle to dip slightly.

To shoot quickly, one needs to minimize this muzzle movement because you can’t shoot accurate shots if your muzzle is off-target. The “M-Lok Fingerstop” grip is the most widely used grip for defensive and competition shooting with semi-auto handguns and other firearms.

Unlike a hand stop, which most folks position at the rear of their support hand, the Finger Stop has a rounded structure that is ergonomically designed to be located between your index and middle fingers.

It typically places it forward on the handguard, which means it doesn’t get in the way when transitioning to prone shooting positions, where most people move their support hand towards the rear.

Let’s discuss the accurate method of establishing this grip on your weapon:

First of all, you may want to buy a CNC Machined Grip to improve shooting. Besides that, when establishing your grip, it’s helpful to pay attention to how the gun moves and how we can adjust our hands to tackle those movements. To begin, the web of the dominant hand should be as high on the backstrap as possible without interfering with the slide’s direction to the rear.

The dominant thumb should be placed on the opposite side of the grip. The four fingers on the dominant hand must grip the gun in a way that allows the index finger to rest on the trigger naturally.

It will help if your trigger finger rest somewhere on the first section of your index finger. The reason for this is to allow the index finger to squeeze the trigger straight back and not to one side.

When you extend the weapon out to the target at eye level, the support hand thumb should be pointed toward the target. It means you should see a straight line beginning at your thumb and extending through your arm.

You can also check if you have nailed it by keeping your support hand on the weapon and removing your dominant hand. You may like to have a firm grip on the weapon without gaps between the gun’s grip and your hand.

Moreover, you want to provide a 360-degree pressure around the grip. The greater pressure, the better, but only to a point the shot. When it comes to the dominant hand, too much begins to make the trigger finger applying grip pressure, and it will cause accuracy issues.

When support hand is concerned, apply as much grip pressure as possible without causing your hands to shake. Apply the grip in the same manner as if you were trying to crush a can of pop.

Something you may notice if insufficient support handgrip is given is your shots drifting to the side. So, make sure you’re putting the support hand to use whenever possible.

If you don’t have a strong grip, you’ll find that it may be harder to manage the recoil as you shoot your gun. Something you can do to help your grip out is to build up your hand strength with exercises. There are also many products available to enhance your gun’s grip, like adhesive grip textures or stippling your gun’s grip to your desire.

With your new MLok Fingerstop or CNC Machined Grip, you should be managing the recoil better, and your rapid-fire groups should be getting tighter. It may take some getting used to, but all the puzzle pieces will come together with proper regular practice.

LEAVE A REPLY

Please enter your comment!
Please enter your name here